Omron FQ2-S/CH Series

Reading with OCR
160
FQ2-S/CH User’s Manual
Use the following examples as reference for setting of the date parameter.
E.g.1
Measurement is performed on 9/30, and the period setting is: Year: 1, Month: 1, Day: 1.
[Month→Day]: A month is added to 9/30, and the result will be 10/30.
A day is added to 10/30, and the result will be 10/31.
[Day→Month]: A day is added to 9/30, and the result will be 10/1.
A month is added to 10/1, and the result will be 11/1.
E.g.2
Measurement is performed on 1/31, and the period setting is: Year: 0, Month: 1, Day: 1.
・[Month→Day]: A month is added to 1/31, and the result will be 2/31.
The month end adjustment will be applied since 2/31 does not exist.
The result of the month end adjustment plus 1 will be the verification string.
[Day→Month]: A day is added to 1/31, and the result will be 2/1.
The month end adjustment will not be applied since 2/31 exists.
A month is added to 2/1, and the result will be 3/1.
[Day→Month]: A day is added to 1/31, and the result will be 2/1.
The month end adjustment will not be applied since 2/31 exists.
A month is added to 2/1, and the result will be 3/1.
Measurement is performed on 10/30, and the period setting is: Year: 0, Month: 1, Day: 1.
[Month→Day]: A month is added to 10/30, and the result will be 11/30.
The month end adjustment will not be applied since 11/30 exists.
A day is added to 11/30, and the result will be 12/1.
[Day→Month]: A day is added to 10/30, and the result will be 10/31.
A month is added to 10/31, and the result will be 11/31.
The month end adjustment will be applied since 11/31 does not exist.
 
Note
2/28
3/1
3/3
Monthendadjust
Result
Lastdayofcurrentmonth
Firstdayofnextmonth
Gapdayofnextmonth
11/30
12/1
12/1
Lastdayofcurrentmonth
Firstdayofnextmonth
Gapdayofnextmonth
Monthendadjust Result