Omron FQ2-S/CH Series User Manual

Basic Operational Flow
28
FQ2-S/CH User’s Manual
Even when a Touch Finder is not connected, you can monitor parallel I/O signals and control output states using
only communication commands.
The following commands are used for this purpose:
• Run Mode settings
• Terminal information get/set commands
For details on each command, refer to the following.
FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
5-1 Command Control
Note

Omron FQ2-S/CH Series Specifications

General

Brand	Omron
Model	FQ2-S/CH Series
Category	Digital Camera
Language	English