Omron FQ2-S/CH Series

Connecting to More Than One Sensor
FQ2-S/CH User’s Manual
391
7
Convenient Functions
Displaying information of individual sensors when multiple sensors are connected
The information of individual sensors can be displayed in the “Multi sensor” display and the “Switch sensor”
display.
“OFF”, “IP address”, or “Sensor name” can be selected for the information that is displayed. The Default is “IP
address”.
(Run Mode) − [Sensor monitor] − [Multi sensor] or (Run Mode) − [Switch sensor]
1 Press [ ] − [Setting disp. info.] at the right of
the display.
2 Press the connected sensor information you
want to display.