Convenient Functions for Operation
414
FQ2-S/CH User’s Manual
Entering the password when switching from [Run] Mode to [Setup] Mode.
• This password restricts only the operation to switch from Run Mode to Setup Mode.
It does not restrict other operations.
• If you forget the password, contact your OMRON representative for the procedure to clear the password.
• The password is deleted when the Sensor is initialized.
1 If a password is set and you try to change from
Run Mode to Setup Mode, the following pass-
word entry display will appear.
2
(Setup Mode)
−
[Sensor settings]
3
Press the text box. A keyboard display will ap-
pear. Enter the password and press [OK].
If the password is correct, the Setup Mode will be
displayed.
To Next Page
Loading...
