Installation
FQ2-S/CH User’s Manual
45
2
Installation and Connections
Macro Rings
Macro rings are inserted between the Lens and the camera to adjust the focus. You can use up to seven macro
rings to achieve the required thickness.
• Do not stack 0.5 mm, 1.0 mm, and 2.0 mm macro rings. These sizes fit between the Lens and the threaded portion
of other macro rings. If two or more are stacked together, the screw cannot be tightened securely.
• The macro rings may need to be reinforced depending on the vibration conditions if over 30 mm is used.
Model Maximum out-
side diameter
Thickness
3Z4S-LE SV-EXR 31 mm
7-piece set
40mm
20mm
10mm
40 mm20 mm10 mm5 mm1 mm 2 mm
Thickness:
0.5 mm
To Next Page
Loading...
