Omron FQ2-S/CH Series

External Reference Parameters
FQ2-S/CH User’s Manual
535
Appendices
9
136 Judge-
ment
condi-
tions
Edge position X upper
limit
Set / Get −99,999.9999 to 99,999.9999 99,999.9999 --- Judgement
condition
137 Edge position X lower
limit
Set / Get −99,999.9999 to 99,999.9999 −99,999.9999 --- Judgement
condition
138 Edge position Y upper
limit
Set / Get −99,999.9999 to 99,999.9999 99,999.9999 --- Judgement
condition
139 Edge position Y lower
limit
Set / Get −99,999.9999 to 99,999.9999 −99,999.9999 --- Judgement
condition
140 Mea-
sure-
ment
condition
Detection mode for
Monochrome Sensor
Set / Get 0: Light to Dark
1: Dark to Light
0 --- ---
141 Edge level absolute
value
Set / Get 0 to 442 20 --- ---
142 Edge level specification
method
Set / Get 0:%
1:Absolute value
0 --- ---
144 Measurement method Set / Get 0: Projection
1: Differentiation
0 --- ---
145 Judge-
ment
condi-
tions
Edge position offset
upper limit
Set / Get −99,999.9999 to 99,999.9999 99,999.9999 --- Judgement
condition
146 Edge position offset
lower limit
Set / Get −99,999.9999 to 99,999.9999 −99,999.9999 --- Judgement
condition
147 Mea-
sure-
ment
condition
Edge level absolute
value (Monochrome
Cameras)
Set / Get 0 to 255 20 --- ---
310 Logging
condi-
tions
Data logging switch for
entire unit
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
311 Data logging switch for
judgement
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
312 Data logging switch for
detected edge position
X
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
313 Data logging switch for
detected edge position
Y
Set / Get 0: Data logging OFF
1: Data logging ON
1 --- ---
316 Data logging switch for
scroll
Set / Get 0: Data logging OFF
1:
Data logging ON
0 --- ---
700 Display
settings
Edge position offset
display
Set / Get 0: Display
1: Do not display
1 --- ---
701 Detected edge position
X display
Set / Get 0: Display
1: Do not display
0 --- ---
702 Detected edge position
Y display
Set / Get 0: Display
1: Do not display
0 --- ---
800 Detected edge position
X display pattern
Set / Get 0: Absolute value
1: Relative value
0 --- ---
801 Detected edge position
Y display pattern
Set / Get 0: Absolute value
1: Relative value
0 --- ---
Exter-
nal ref-
erence
number
Category Data name Set / Get Data range Default Expres-
sion
text
string
Logged data/
Judgement
parameter