Specifications and Dimensions
FQ2-S/CH User’s Manual
549
Appendices
9
Table 1
*1: Registration may not be possible for all scenes, depending on the settings.
*2: Applicable standards:IEC62471-2
*3: Tolerance: ±10% max.
Table 2
*4: Do not allow the load current to exceed 50 mA. The output circuit may be damaged if the load current exceeds 50 mA.
Single-function models Standard models Field of view
(H×V) *3
Installation dis-
tance
Num-
ber of
LEDs
Weight
NPN PNP NPN PNP
FQ2-S10010F FQ2-S15010F FQ2-S20010F FQ2-S25010F 7.5 × 4.7 to
13 × 8.2 mm
38 to 57 mm 4
Approx.
160 g
FQ2-S10050F FQ2-S15050F FQ2-S20050F FQ2-S25050F 13 × 8.2 to
53 × 33 mm
56 to 215 mm 4
FQ2-S10100F FQ2-S15100F FQ2-S20100F FQ2-S25100F 53 × 33 to
240 × 153 mm
220 to 970 mm 8
Approx.
150 g
FQ2-S10100N FQ2-S15100N FQ2-S20100N FQ2-S25100N 29 × 18 to
300 × 191 mm
32 to 380 mm 8
High-resolution models Field of view
(H×V) *3
Installation dis-
tance
Num-
ber of
LEDs
Weight
NPN PNP
FQ2-S30010F- FQ2-S35010F- 7.5×6.7 to
13×11.6 mm
38 to 57 mm 4 Approx.
160 g
FQ2-S30050F- FQ2-S35050F- 13×11.6 to
53×47.3 mm
56 to 215 mm 4
FQ2-S30100F- FQ2-S35100F- 53×47.3 to
240×214 mm
220 to 970 mm 8
Approx.
150 g
FQ2-S30100N- FQ2-S35100N- 29×25.9 to
300×268 mm
32 to 380 mm 8
Item NPN PNP
Input specifi-
cations
ON: Shorted to 0 V, or 1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
ON: Shorted to power supply voltage, or power supply volt-
age −1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
Output speci-
fications
*3
NPN open collector
30 VDC, 50 mA max., residual voltage: 2.0 V max.
PNP open collector
30 VDC, 50 mA max., residual voltage: 2.0 V max.
To Next Page
Loading...
