Omron FQ2-S/CH Series

Adjusting Image Quality
84
FQ2-S/CH User’s Manual
[Image] − [Camera setup]
Using a Polarizing Filter (Only for Sensors with Built-in Lighting)
Specular reflections can be eliminated from an image by attaching an FQ-XF1 Polarizing Filter to the Sensor.
Observe the following precautions.
• The image will be darker compared to when no filter is used.
• If the image becomes too dark, adjust the brightness.
Adjusting the Brightness
・When HDR Is OFF: p. 79
・When HDR Is ON: p. 81
1 Press [ ] − [HDR] on the right side of the display.
2 Set the best level for the HDR Mode.
As shown below, the higher the level, the wider the
combined dynamic range will be.
Level 1
Level 2
Level 3
Level 4
Dark
Bright