© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
3 If touch screen has failed entirely, console will need to be
replaced. This is not a replaceable part.
Single Secret Handshake Procedure
Procedure
1 The Welcome screen will be the first screen you see when you
approach the P80 console. Press the Pause key and continue holding
it down while you double press (prior to 1.1 version software
release) or single press (1.1 version or after software release) in
sequential order an X configuration on the Volume and Channel key
pad (Channel Up, Volume Down, Volume Up, Channel Down).
Release the Pause key when done pressing the arrows.
Note: The keypad X configuration sequence should be not faster than 1
second between each key stroke. Any speed faster than 1 second may result
in an unsuccessful access to the sign-in screen.
Figure 47: P80 Sign In Access
2 The sign-in screen will be displayed. Type in the technician access
code and then touch OK. The Settings menu will be displayed. See
Settings Table.
To Next Page
Loading...
Need help?
General
