© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Figure 137: Upper Arm Grip Removal
6 Repeat the process for the remaining upper arm grip.
Rear Flat Belt Terminal Cover Removal
7 Remove the two #10-24 X 1.25 screws that secure the flat belt
terminal covers to the flat belt terminal, remove the outside
terminal cover.
8 Rotate the top of the inside terminal cover down until it is below
the stairarm pedal, pull to remove.
9 Repeat the process for the remaining rear flat belt terminal cover.
To Next Page
Loading...
Need help?
General
