© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Figure 33: Settings Exported Successfully
11 The settings export is now complete and you can exit the service
mode by touching the back arrow until you get to the Welcome screen.
12 Move the USB Flash Drive device with the saved settings to a P80
console that you would like to import the saved settings.
13 Access the Manage Settings screen by following the described steps 1
through 9.
14 Insert the USB Flash Drive into the USB Drive Port of the P80
console.
15 Wait for the USB Flash Drive Icons to become active (light up) and
then select Import from USB.