Precor AMT Series User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 176
Figure 95: Flat Belt Terminal Covers
4 Remove the tension from the inner flat belt pulleys by lifting up on
the stairarms, pulling the flat belts off the flat belt pulleys, and
then gently setting the stairarm down.
5 Remove the flat belt terminal stop bolt and washer.
6 Remove the flat belt terminal adjustment bolt and washer.
Figure 96: Flat Belt Clamp and Flat Belt Terminal

Precor AMT Series Specifications

General

Brand	Precor
Model	AMT Series
Category	Elliptical Trainer
Language	English