© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Press down firmly the yellow button on the dash.
6
reset itself shortly.
Pull the lanyard to disengage the reset latch. P
Possible Causes
1 The Stop Switch lanyard has been pulled and the reset latch has been
disengaged. The yellow button will be raised on the dash.
2 The stop switch reset latch has been engaged, but not fully so.
3 The cable connecting the stop switch to the console is disconnected,
loose, or damaged.
4 The stop switch is malfunctioning
Possible Remedies
the yellow button on the dash to reset the treadmill.
y on
7 Inspect the connections leading from the stop switch to the console.
Ensure that the cables are secure and undamaged.
8 Replace the stop switch assembly.
Unit reboots of its own volition
Description
Console fully reboots without any outside input, either during the boot
process or while in operation.
Possible Causes
1 Power connections outside fitness equipment are loose or bad
2 Power connections inside fitness equipment are loose or bad
3 Faulty power supply
4 Facility power is not configured correctly.
5 Faulty console
To Next Page
Loading...
Need help?
General
