© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
On-Site Preventive Maintenance (Service Technician)
♦
When you are called to service a AMT, perform these preventive
maintenance activities:
♦
Perform the software diagnostics. Check LED and keypad function.
Record the odometer reading.
♦
Check stride rate and stride length sensor function (is the stride
rate and stride length displayed when the unit is in operation?).
♦
Visually inspect the drive belts and flat belts for cracks, fraying
or excessive wear.
♦
When furnished, inspect the optional power supply cords. If a power
supply cord(s) is damaged, install a new power supply.
♦
Visually examine all wires and check connectors and wire
connections. Secure connections and replace wiring as necessary.
♦
Cardio Theater cord management must be observed.
To Next Page
Loading...
Need help?
General
