Precor AMT Series User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 313
Figure 256: Drive Input Flat Belt Pulley
19 Remove the screw and square washer that secures the drive input
pulley assembly to the drive input housing. Pull the drive input
pulley out of the housing.
Note: If necessary a rubber mallet can be used to dislodge the input pulley
assembly from the housing by tapping on the input shaft.
Figure 257: Drive Input Assembly

Precor AMT Series Specifications

General

Brand	Precor
Model	AMT Series
Category	Elliptical Trainer
Language	English