© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Message Out of Service Displayed
Description
Console is displaying a message that says Temporarily Out of Service.
Please use another machine.
Possible Causes
1 Software has encountered an error causing the console to enter Out
of Service mode
2 The Auto Stop sensor on a treadmill is missing, improperly
installed, or malfunctioning (Treadmill Only).
Possible Remedies
3 Reboot the console. Most issues causing Out of Service errors will
be cleared from a reboot.
4 Treadmill Only. Inspect the Auto Stop sensor and ensure it is
installed properly. Inspect Auto Stop cable to ensure it is
inserted properly and undamaged. Repair or replace if needed. OOS
error will clear as soon as the sensor is detected. Do not disable
the Auto Stop sensor in the software. For more trouble shooting
information on the Auto Stop feature see Troubleshooting- TRM_
Trouble Shooting the Auto Stop Feature.
Message Please Reset the Treadmill Displayed
Description
On a treadmill, the screen displays the message, Please Reset the
Treadmill along with a graphic of the stop switch.
To Next Page
Loading...
Need help?
General
