© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
•
During service operations you will be very close to moving
machinery and voltage bearing components. When you perform
maintenance procedures with the covers removed, remove jewelry
(especially from ears and neck), tie up long hair, remove neck
ties, and do not wear loose clothing.
•
Exercise caution when touching any wire or electrical component
during AMT operation.
•
A pinching hazard exists when the unit is operated. It is
possible to seriously pinch a finger. The AMT can be mechanically
locked by inserting a screwdriver through the primary sheave and
frame. See the illustration below. Locking the AMT will prevent
accidental pinching.
A pinching hazard exists when the unit is operated. It is possible to
seriously pinch a finger. The AMT can be made immobile by lift the
stairarm pedals and removing the tension from stairarm flat belts.
Removing the tension from the flat belts will prevent accidental
pinching.
Safety
Safety guidelines you should know and follow include:
To Next Page
Loading...
Need help?
General
