Precor AMT Series User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 358
Figure 315: Gas Shock
8 Using needle nosed pliers, pull the retaining clip off the lower gas
mounting stud and remove shock.
Incline Motor Removal
9 Remove the hitch pin from the Incline motor mounting pin.
10 Remove the Incline motor mounting pin. If the Incline is jammed or
has excessive pressure on the pin, it may be necessary to drive the
pin out of the Incline motor tube and Incline platform using a punch
and rubber mallet.

Precor AMT Series Specifications

General

Brand	Precor
Model	AMT Series
Category	Elliptical Trainer
Language	English