© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Figure 19: P80 Console
P80 Settings
Procedure
1 The Welcome screen will be the first screen you see when you
approach the P80 console. Press the Pause key and continue holding
it down while you double press (prior to 1.1 version software
release) or single press (1.1 version or after software release) in
sequential order an X configuration on the Volume and Channel key
pad (Channel Up, Volume Down, Volume Up, Channel Down).
Release the Pause key when done pressing the arrows.
To Next Page
Loading...
Need help?
General
