© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Front Arm and Cam Replacement Procedure
Front Arm Removal
1 Remove the main body covers as per procedure, Cover Replacement (on
page 152).
2 Remove the tension from the inner flat belt pulleys by lifting up on
the stairarms, pulling the flat belts off the flat belt pulleys, and
then gently setting the stairarm down.
Upper Arm Cam Cover Removal
3 Remove the two #10-24X1.25 screws that secure the upper arm cam
covers to the upper arm, then remove the covers. It may be necessary
to adjust the position of the vertical handlebar to gain access to
the upper arm cam cover screws.
To Next Page
Loading...
Need help?
General
