Precor AMT Series User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 274
Figure 212: Generator
7 Remove the drive input belt from the step up pulley.
8 Remove the generator belt and discard.
9 Place the replacement generator belt over the larger step up pulley
and the generator, ensure the belt is seated in the grooved of the
pulley's.
10 Replace the input drive belt over the smaller pulley on the step up
pulley.
11 Place a belt gauge on the drive input belt as shown below.

Precor AMT Series Specifications

General

Brand	Precor
Model	AMT Series
Category	Elliptical Trainer
Language	English