Precor AMT Series User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 245
Figure 178: Front Arm Mounting Bolt
22 Insert and finger tighten the six main arm shaft bolts that secure
the main shaft clamp to the lower main shaft clamp.
23 Use the following sequence to ensure the upper arm main shaft is
properly secured to the front arm shaft; torque the bolts to 160
inch pounds.
Figure 179: Main Shaft Clamp Bolts- Torque Sequence

Precor AMT Series Specifications

General

Brand	Precor
Model	AMT Series
Category	Elliptical Trainer
Language	English