© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
♦
Read the owner’s manual and follow all operating instructions.
♦
Operate the AMT on a solid, level surface with the unit properly
leveled. The AMT is properly leveled when all five feet are in
contact with the floor. Visually check the AMT before beginning
service or maintenance operations. If it is not completely assembled
or is damaged in any way, exercise extreme caution while operating
and checking the AMT.
♦
When operating the AMT, do not wear loose clothing. Do not wear
shoes with heels or leather soles. Check the soles of your shoes and
remove any embedded stones. Tie long hair back.
♦
Do not rock the unit. Do not stand or climb on the handlebars,
display enclosure, or cover.
♦
Do not set anything on the handlebars, display enclosure, or cover.
Never place liquids on any part of the AMT, while performing
service.
♦
To prevent electrical shock, keep all electrical components away
from water and other liquids.
♦
Do not use accessory attachments that are not recommended by the
manufacturer-such attachments might cause injuries.
♦
AMT’s equipped with Cardio Theater PVS units will have external
power supply and coaxial cable routed through the bottom of the unit
to the top of the display console. Cord management must be
maintained.
General Information
For the latest exploded view, part number and part pricing information,
visit the Precor dealer website at www.precor.com/connection.
Tools Required
US and metric end wrench set
Allen wrench set
US and metric socket wrench
Torque wrench, 200 in./lbs.
Torque wrench, 200 ft./lbs
OTC 6673 Universal Belt
Tension Gauge
4 - 6 gear puller
To Next Page
Loading...
Need help?
General
