Precor AMT Series User Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 178
Figure 98: Stairarm Height Measurement
15 If the measurement is too low or too high, tighten or loosen the
adjustment bolt until the 3 7/8 inch measurement is achieved.
Figure 99: Flat Belt Terminal Adjustment
16 Repeat the process for the remaining stairarm.
17 Fully tighten the stop bolt, torque to 300 inch pounds (25 ft-lbs)
or 25 foot pounds.

Precor AMT Series Specifications

General

Brand	Precor
Model	AMT Series
Category	Elliptical Trainer
Language	English