6-123-043 Corner Stapler Leading Edge
Detection Sensor
ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-044 Corner Stapler Staple End
Sensor
ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-045 Booklet Stapler Staple End
Sensor: Front
ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-046 Booklet Stapler Staple End
Sensor: Rear
ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-047 Shift Tray Lower Limit Sensor 1 ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-048 Shift Tray Lower Limit Sensor 2 ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-049 Shift Tray Lower Limit Sensor 3 ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-050 Shift Tray Lower Limit Sensor 4 ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-051 Shift Tray Lower Limit Sensor 5 ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-052 Punch Chad Full Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
6-123-053 Punch Set Detection ENG [0 or 1 / 0 / 1/step]
0: connected
1: not connected
Gets connection status of punch unit.
3. Engine SP Mode Tables
580
To Next Page
Loading...
