6-123-054 Shift Jogger Set Detection ENG [0 or 1 / 0 / 1/step]
0: connected
1: not connected
Gets connection status of setting jogger unit.
* Not use: currently, VOLGA-B does not have setting jogger in system configuration.
6-123-055 Booklet Stapler Set Detection ENG [0 or 1 / 0 / 1/step]
0: not connected
1: connected
Gets connection status of saddle stitch unit.
6-123-056 Front Door SW ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-057 Dynamic Roller Open/Close
Guide Plate Sensor
ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-058 Tray Upper Limit SW ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-059 Paper Exit Open/Close Guide
Plate Limit SW
ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-060 Punch Selection DIPSW 1 ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-061 Punch Selection DIPSW 2 ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-065 Paper Guide HP Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6-123-066 Shift Jogger HP Sensor: Front ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
Input and Output Check
581
To Next Page
Loading...
