Initializes the DCS (Delivery Control Service) settings.
• SP5-832-001 (HDD Formatting : HDD Formatting (ALL))
Initializes the hard disk.
• SP5-832-002 (HDD Formatting : HDD Formatting (IMH))
Initializes the hard disk.
• SP5-836-001 (Capture Settings: Capture Function (0:Off 1:On))
With this function disabled, the settings related to the capture feature cannot be initialized,
displayed, or selected.
• 5-878-001 (Data Overwrite Security)
Enables the Data Overwrite Security unit. Press "EXECUTE" on the operation panel. Then turn the
machine off and on.
• SP5-990-005 (SP Print Mode: Diagnostic Report).
Prints the configuration sheets of the system and user settings : SMC.
Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the
latest settings may not be collected when the SMC is printed.
2. Installation
454
To Next Page
Loading...
