No. Result Description
4 HDD error
Cannot download or update as the HDD cannot be
used.
5 Version information obtain error
Cannot download or update as the version information
cannot be obtained.
6 Update download error
Cannot download or update as the update download
failed.
In non @Remote method, this shows that the download
failed because there was no proxy set.
7 Name resolution error
Cannot download or update as the name cannot be
resolved upon downloading the update.
8 Auto update setting disabled
The package has been downloaded but will not run the
update as SP5-886-111 (auto update setting) is
disabled and SP5-886-115 (auto download setting for
SFU) is enabled.
9 Update prohibited time
Cannot start to update as the auto update prohibited
time setting (SP5-886-112) is enabled and the time
update initiated was in the range of prohibited time
(SP5-886-113 to 114).
Or the day which update was initiated was a day for
which update was prohibited (SP5-886-120).
10
Update postponed due to machine
in use
Cannot start update due to the following conditions
when update was initiated.
• The machine is in use by a user (the panel was
used within 30 seconds)
• Machine offline for other reasons
• Operation prohibited
• Displaying SP/UP menu
• Firmware update is running with another method
• Configuration change prohibited
• Verifying the operation panel (smart panel)
11 Update cancelled by user
Update was cancelled because a user selected
"Cancel" in the popup shown before starting the
update.
Firmware Update (Auto Remote Firmware Update)
797
To Next Page
Loading...
