SC No. Type Error Name/Error Condition/Major Cause/Solution
The following board defects (Parts implementation defect, solder scrap,
implemented parts defect, etc.);
• BCU
• IPU
1. Turn the main power OFF/ON.
2. Replace the IPU.
3. Reconnect the harness between BCU and IPU.
4. Replace the harness between BCU and IPU.
5. Replace the BCU.
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC668-01 D Vodka1 Version Setting Error
The machine detects the version settings error in Vodka1 when starting
up, or recovery from energy saver mode.
The following board defects (Parts implementation defect, solder scrap,
implemented parts defect, etc.);
• BCU
• Paper Transport IOB
1. Turn the main power OFF/ON.
2. Replace the Paper Transport IOB.
3. Replace the BCU.
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC668-02 D Vodka2 Version Setting Error
The machine detects the version settings error in Vodka2 when starting
up, or recovery from energy saver mode.
The following board defects (Parts implementation defect, solder scrap,
implemented parts defect, etc.);
• BCU
• Imaging IOB
6. Troubleshooting
952
To Next Page
Loading...
