SC No. Type Error Name/Error Condition/Major Cause/Solution
1. Turn the main power OFF/ON.
2. Replace the Imaging IOB.
3. Replace the BCU.
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC668-03 D Vodka1,2 Version Setting Error
The machine detects the version settings error in both Vodka 1 and
Vodka2 when starting up, or recovery from energy saver mode.
The following board defects (Parts implementation defect, solder scrap,
implemented parts defect, etc.);
• BCU
• Imaging IOB
• Paper Transport IOB
1. Turn the main power OFF/ON.
2. Replace the BCU.
3. Replace the Imaging IOB.
4. Replace the Paper Transport IOB.
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC669 EEPROM Communication Error
SC669-01 D EEPROM OPEN: ID error
SC669-02 D EEPROM OPEN: Channel error
SC669-03 D EEPROM OPEN: Device error
SC669-04 D EEPROM OPEN: Communication abort error
SC669-05 D EEPROM OPEN: Communication timeout error
SC669-06 D EEPROM OPEN: Operation stopped error
SC669-07 D EEPROM OPEN: Buffer full
SC669-08 D EEPROM OPEN: No error code
SC620-Service Call 620-689
953
To Next Page
Loading...
