Rohde & Schwarz MXO 4 Series - Page 489

Remote control commandsMXO 4 Series
489User Manual 1335.5337.02 ─ 07
Parameters:
<ActiveKey> Index of the active layout
Usage: Asynchronous command
LAYout<ly>:SACTive
Activates the specified SmartGrid configuration. The command has the same effect as
LAYout<ly>:ACTive but it has no query, and the active layout is specified by the suf-
fix.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
Example: See Chapter 17.4.1, "SmartGrid layout with zoom", on page 474.
Usage: Setting only
Asynchronous command
LAYout<ly>:LABel <Label>
Defines a name for the specified layout (SmartGrid configuration).
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
Parameters:
<Label> String with the layout name
Usage: Asynchronous command
LAYout<ly>:DIAGram<da>:COUNt?
Returns the number of diagrams in a specified layout.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<da> Irrelevant, omit the suffix.
Return values:
<Count> Number of diagrams
Usage: Query only
Asynchronous command
LAYout<ly>:DIAGram<da>[:ENABle] <State>
Creates and displays a specified diagram in a specified layout. OFF deletes the dia-
gram.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
Instrument setup