Rohde & Schwarz MXO 4 Series - Page 614

Remote control commandsMXO 4 Series
614User Manual 1335.5337.02 ─ 07
MEASurement<mg>:COUNt?
Returns the maximum number of measurements, which is the maximum value for the
<mg> suffix.
Suffix:
<mg>
.
Irrelevant, omit the suffix.
Return values:
<Count> Maximum number of measurements
Usage: Query only
Asynchronous command
MEASurement<mg>[:ENABle]
<First>
Switches the indicated measurement on or off.
Suffix:
<mg>
.
1...16, index of the measurement
Parameters:
<First> ON | OFF
Usage: Asynchronous command
MEASurement<mg>:SOURce <SignalSource>,[<SignalSource2>]
Sets the source of the measurement.
Suffix:
<mg>
.
1...16, index of the measurement
Parameters:
<SignalSource> NONE | C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 |
D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15 | M1 | M2 | M3 | M4 |
M5
<SignalSource2> NONE | C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 |
D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15 | M1 | M2 | M3 | M4 |
M5
Usage: Asynchronous command
Manual operation: See "Source" on page 231
MEASurement<mg>:FSRC <Source>
Defines the first measurement source.
The command is an alternative to MEASurement<mg>:SOURce.
Suffix:
<mg>
.
1...16, index of the measurement
Automatic measurements