Rohde & Schwarz MXO 4 Series - Page 684

Remote control commandsMXO 4 Series
684User Manual 1335.5337.02 ─ 07
For details on the statistics, see "Overview of statistic commands" on page 676.
Suffix:
<m>
.
1...3, index of the power analysis measurement
Return values:
<StdDev> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Usage: Query only
Asynchronous command
POWer<m>:QUALity:RESult:VOLTage:FREQuency[:ACTual]?
POWer<m>:QUALity:RESult:VOLTage:FREQuency:AVERage?
POWer<m>:QUALity:RESult:VOLTage:FREQuency:NPEak?
POWer<m>:QUALity:RESult:VOLTage:FREQuency:PPEak?
POWer<m>:QUALity:RESult:VOLTage:FREQuency:RMS?
POWer<m>:QUALity:RESult:VOLTage:FREQuency:STDDev?
Returns the voltage frequency value for the power quality analysis.
For details on the statistics, see "Overview of statistic commands" on page 676.
Suffix:
<m>
.
1...3, index of the power analysis measurement
Return values:
<StdDev> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Usage: Query only
Asynchronous command
POWer<m>:QUALity:RESult:VOLTage:PEAK[:ACTual]?
POWer<m>:QUALity:RESult:VOLTage:PEAK:AVERage?
POWer<m>:QUALity:RESult:VOLTage:PEAK:NPEak?
POWer<m>:QUALity:RESult:VOLTage:PEAK:PPEak?
POWer<m>:QUALity:RESult:VOLTage:PEAK:RMS?
POWer<m>:QUALity:RESult:VOLTage:PEAK:STDDev?
Returns the voltage peak value, the highest measured magnitude value for the power
quality analysis.
For details on the statistics, see "Overview of statistic commands" on page 676.
Suffix:
<m>
.
1...3, index of the power analysis measurement
Return values:
<StdDev> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Applications