Documentation
ARCADIS Varic
SPR2-310.620.30.02.02 23
of 98
Exposing/printing a
film sheet
Instead of a whole film job you can also transfer single film sheets to the camera
or printer.
◆ Select a film sheet.
◆ Call up Film > Expose Film Sheet.
– Only the selected film sheet is processed.
Incorrect film size
If the film size set for the film sheet waiting to be exposed/printed is not support-
ed by the selected camera, the Incorrect Film Size dialog box is displayed.
◆ Select the film size configured for the camera/printer from the selection list.
◆ Confirm with OK.
– Filming is resumed.
To Next Page
Loading...
