Commands listed in alphabetical order
BUS:B<x>:ARI
NC429A:POLARITY
This command sets or queries the source p olarity for the specified ARINC429
bus. The bus is specified by x.
Conditions
Requires option SR-AERO.
Group
Bus
Syntax
BUS:B<x>:ARINC429A:POLARI TY {NORMal|INVERTed}
BUS:B<x>:ARINC429A:POLARI TY?
Arguments
NORMal specifies normal polarity.
INVERTed specifies inverted polarity.
Examples
BUS:B3:ARINC429A:POLARITY INVERTED sets Bus 3 ARINC429 polarity to
inverted.
BUS:B2:ARINC429A:POLARITY ? might return
:BUS:B2:ARINC429A:POLARIT Y NORMAL, indicating that the Bus 2
ARINC429 polarity is set to n ormal.
BUS:B<x>:ARINC429A:SOUrce
This command sets or queries the source for the specified ARINC429 bus. The
bus is specified by x.
Conditions
Requires option SR-AERO.
Group
Bus
Syntax
BUS:B<x>:ARINC429A:SOUrce {CH<X>|Math<x>|REF<x>}
BUS:B<x>:ARINC429A:SOUrce ?
Arguments
CH<x> specifies an analog channel as t he source waveform for the ARINC429 bus.
Math<x> specifies a math waveform as the source waveform for the ARINC429
bus.
REF<x> specifies a reference waveform as the source waveform for the
ARINC429 bus.
2-11 6 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
