To Next Page

To Previous Page

Commands listed in alphabetical order

MATH:MATH<x>

:LABel:XPOS

This command sets or queries the X position of the speciﬁed math label. Maths

are speciﬁed by x.

Group

Math

Syntax

MATH:MATH<x>:LABel:XPOS <NR1>

MATH:MATH<x>:LABel:XPOS?

Related Commands

MATH:MATH<x>:LABel:YPOS

Arguments

<NR1> is the location (in pixels) where the label for the s elected math waveform

is displayed, relative to the left edge of the display.

Examples

MATH:MATH2:LABEL:XPOS 5 moves the waveform label for the Math 2

waveform so that it begins 5 pixels to the right of the left edge of the screen.

MATH:MATH2:LABEL:XPOS? might return :MATH:MATH2:LABEL:XPOS 2.5,

indicating that the waveform label for the Math 2 waveform is currently 2.5 pixels

to the right of the left edge of the display.

MATH:MATH<x>:LABel:YPOS

This command sets or queries the y-position of the speciﬁed math label. The

Math waveform is speciﬁed by x.

Group

Math

Syntax

MATH:MATH<x>:LABel:YPOS <NR1>

MATH:MATH<x>:LABel:YPOS?

Related Commands

MATH:MATH<x>:LABel:XPOS

Arguments

<NR1> is the location (in pixels) where the label for the s elected math waveform

is displayed, relative to the baseline of the waveform.

Examples

MATH:MATH2:LABEL:YPOS -2.5 moves the waveform label for the Math 2

waveform to 2.5 pixels below the baseline of the waveform.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-371

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54