Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Syntax
TRIGger:{A|B}
:BUS:B<x>:USB:SPLit:HUB:VALu e <QString>
TRIGger:{A|B}:BUS:B<x>:USB :SPLit:HUB:VALue?
Related Commands
TRIGger:{A|B}:BUS:B<x>:USB:SPECIALType
Arguments
QString is a quoted string of up to 7 characters. The valid characters are 0 and 1.
Examples
TRIGger:A:BUS:B1:USB:SPLit :HUB:VALue "001010" sets the split
transaction hub address to trigger on to 001010.
TRIGger:A:BUS:B1:USB:SPLit :HUB:VALue? might return XXXXXXX,
indicating that the hub address value to trigger on doesn’t matter.
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:PORT:VALue
When triggering on a high-speed USB split transaction, this command specifies
the split transaction port address value to trigger on. The trigger condition must be
set to Special with a p acket type SPLIT. The value can b e up to 7 characters long.
The default is all X’s (don’t care). The bus number is specified by <x>.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:USB :SPLit:PORT:VALue <QStrin g>
TRIGger:{A|B}:BUS:B<x>:USB :SPLit:PORT:VALue?
Related Commands
TRIGger:{A|B}:BUS:B<x>:USB:SPECIALType
Arguments
QString is a quoted string of up to 7 characters. The valid characters are 0 and 1.
Examples
TRIGger:A:BUS:B1:USB:SPLit :PORT:VALue "001010" sets the split
transaction hub address to trigger on to 001010.
TRIGger:A:BUS:B1:USB:SPLit :PORT:VALue? might return XXXXXXX,
indicating that the hub address value to trigger on doesn’t matter.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-845

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English