Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Syntax
TRIGger:{A|B}
:BUS:B<x>:FLEXray:FRAMEType
{NORMal|PAYLoad|NULL|SYNC| STARTup}
TRIGger:{A|B
}:BUS:B<x>:FLEXray:FRAMETy pe?
Arguments
NORMal spe cifies the normal frame type.
PAYLoad specifies the payload frame type.
NULL specifies the null frame type.
SYNC specifies the sync frame type.
STARTup specifies the startup frame type.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:F RAMETYPE PAYLOAD sets the frame type to
payload.
TRIGGER:A:BUS:B1:FLEXRAY:F RAMETYPE? might return
TRIGGER:A:BUS:B1:FLEXRAY:F RAMETYPE NORMAL indicating the
frame type is set to normal.
TRIGger:{A|B}:BUS:B<x>:FLEXray:HEADER:CRC
This command specifies the CRC portion of the binary header string when
triggering on the FlexRay bus signal. The trigger condition n eeds to be set to
HEADer (using TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition). The bus
number is specified by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FLE Xray:HEADER:CRC <QString>
TRIGger:{A|B}:BUS:B<x>:FLE Xray:HEADER:CRC?
Arguments
<QString> is a quoted string that is the CRC portion of the
binary header string.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:H EADER:CRC "11001100101" sets the CRC
portion of the binary header string to 11001100101.
TRIGGER:A:BUS:B1:FLEXRAY:H EADER:CRC? might return
TRIGGER:A:BUS:B1:FLEXRAY:H EADER:CRC "XXXXXXXXXXX" indicating the
CRC portion of the binary header string is don't care.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-803

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English