Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR
This command sets or queries the value of the broadcast command received bit
(BCR bit, bit 15) in a status word for a MIL-STD-1553 bus to search on. The
search numbe
risspecified by x. The search condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:BCR
{ONE|ZERo|NOCARE}
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:BCR?
Arguments
ONE filters
status words to only match those w here the BCR bit has a value of 1.
ZERo filters status words to only m atch those where the BCR bit has a value of 0.
NOCARE disables filtering of status words on the BCR bit.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:STATUS:BIT:BCR ONE
specifies fi ltering status words for those where the BCR bit has a value of 1.
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:STATUS:BIT:BCR? might
return NOCARE, indicating that status words are not being filteredbasedon
the BCR bit value.
SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY
This command sets or queries the value of the busy bit (BUSY bit, bit 16) in a
status word for a MIL-STD-1553 bus to search on. The search number is specified
by x. The search condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:BUSY {ONE
ZERo NOCARE}
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:BUSY?
2-690 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
