Commands listed in alphabetical order
MEASUrement:M
EAS1:REFVoltage?
might return
:MEASUREMENT:MEAS1:REFVOL TAGE 0.0E+0 indicating the reference voltage
value for the measurement is 0.0 V.
MEASUrement
:MEAS<x>:RESUlts:ALLAcqs:MAXimum? (Query Only)
This query-only command returns the maximum value for all accumulated
measurement acquisitions of the specified measurement. The m easurement
number is s
pecified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:RESUl ts:ALLAcqs:MAXimu
m?
Returns
The maximum value for all accumulated measurement acquisitions of the
specified measurement.
Examples
MEASUrement:MEAS1:RESUlts :ALLAcqs:MAXimum? might return
:MEASUREMENT:MEAS1:RESULT S:ALLACQS:MAXIMUM 2.420 indicating the
maximum measurement value is 2.420 V.
MEASUrement:MEAS<x>:RESUlts:ALLAcqs:MEAN? (Query O nly)
This query-only command returns the mean value for all accumulated
measurement acquisitions for measurement <x>.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:RESUl ts:ALLAcqs:MEAN?
Returns
The mean value for all accumulated measurement acquisitions for measurement
<x>.
Examples
MEASUrement:MEAS1:RESUlts :ALLAcqs:MEAN? might return
:MEASUREMENT:MEAS1:RESULT S:ALLACQS:MEAN 2.28076177546 47
indicating the measurement mean is 2.28 V.
2-480 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
