Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
TRIGger:{A|B
}:BUS:B<x>:FLEXray:HEADER:CYCLEcount
This command specifies the cycle count portion of the binary header string when
triggering on the FlexRay bus header. The trigger condition needs to be set to
HEADer (usin
g TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition). The bus
number is specified by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FL EXray:HEADER:CYCLEcount < QString>
TRIGger:{A|B}:BUS:B<x>:FL EXray:HEADER:CYCLEcount?
Arguments
<QString> is a quoted string that is the cycle count portion o f the binary header
string.
Examples
TRIGGER:A:BUS:B1:FLEXRAY: HEADER:CYCLECOUNT "110010 " sets the
cycle count to 110010.
TRIGGER:A:BUS:B1:FLEXRAY: HEADER:CYCLECOUNT? might return
TRIGGER:A:BUS:B1:FLEXRAY: HEADER:CYCLECOUNT "XXXXXX " indicating
the cycle count is don't care.
TRIGger:{A|B}:BUS:B<x>:FLEXray:HEADER:FRAMEID
This command specifies the frame ID portion of the binary header string when
triggering on the FlexRay bus header. The trigger condition needs to be set to
HEADer (using TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition). The bus
number is specified by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FL EXray:HEADER:FRAMEID <QSt ring>
TRIGger:{A|B}:BUS:B<x>:FL EXray:HEADER:FRAMEID?
Arguments
<QString> is a quoted string that represents the frame ID portion of the binary
header string.
2-804 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English