Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Arguments
ON displays the
label in bold font.
OFF does not display the label in bold font.
1 displays the label in bold font.
0 does not display the label in bold font.
Examples
BUS:B1:LABel:FONT:BOLD OFF turns off bold font.
BUS:B1:LABel:FONT:BOLD? might return :BUS:B1:LABEL:FONT:BOLD 1
indicating a bold font.
BUS:B<x>:LABel:FONT:ITALic
This command s ets or queries the italic state of the specified bus label. The bus
is specified by x.
Group
Bus
Syntax
BUS:B<x>:LABel:FONT:ITALi c {ON|OFF|1|0}
BUS:B<x>:LABel:FONT:ITALi c?
Arguments
ON displays the label in italic font.
OFF does not display the label in italic font.
1 displays the label in italic font.
0 does not display the label in italic font.
Examples
BUS:B1LABel:FONT:ITALic OFF turns off italic font.
BUS:B1LABel:FONT:ITALic? might return :BUS:B1:LABEL:FONT:ITAL IC
1
indicating the font is italic.
BUS:B<x>:LABel:FONT:SIZE
This command sets or queries the font size of the specified bus label. The bus
is specified by x.
Group
Bus
2-148 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English