To Next Page

To Previous Page

Commands listed in alphabetical order

Examples

MEASUrement:M

EAS1:BIN 2

sets the bin count to 2.

MEASUrement:MEAS1:BIN? might return :MEASUREMENT:MEAS 1:BIN 1

indicating th

e bin count is 1.

MEASUrement:MEAS<x>:BITCfgmode

This command sets or queries whether the measurement returns the mean or

mode statis

tic result when the measurement type is bit amplitude/high/low.

Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:BITCfg mode {MEAN|MODE}

MEASUrement:MEAS<x>:BITCfg mode?

Arguments

MEAN speciﬁes that the measurement returns results for each bit.

MODE speciﬁes that the measurement returns the mode of its results.

Examples

MEASUrement:MEAS1:BITCfgmo de MODE speciﬁes that the measurement

returns the mode of its results.

MEASUrement:MEAS1:BITCfgmo de? might return

:MEASUREMENT:MEAS1:BITCFGM ODE MEAN indicating the conﬁguration mode

is set to MEAN.

MEASUrement:MEAS<x>:BITEnd

This command sets or queries the bit end as a percentage of the unit interval.

Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:BITEnd <NR3>

MEASUrement:MEAS<x>:BITEnd ?

Arguments

<NR3> is the bit end.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-423

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54