To Next Page

To Previous Page

Commands listed in alphabetical order

Syntax

BUS:B<x>:AUDi

o:CLOCk:POLarity {FALL|RISE}

BUS:B<x>:AUDio:CLOCk:POLar ity?

Arguments

FALL sets falling edge as the clock polarity.

RISE sets rising edge as the clock polarity.

Examples

BUS:B1:AUDIO:CLOCK:POLARIT Y FALL sets the clock polarity to Fall.

BUS:B1:AUDIO:CLOCK:POLARIT Y? might return

:BUS:B1:AUDIO:CLOCK:POLARI TY RISE indicating that the clock polarity

is set to Rise.

BUS:B<x>:AUDio:CLOCk:SOUrce

This command sets or queries the clock source waveform for the speciﬁed

AUDIO bus. The bus is speciﬁed by x.

Conditions

Requires option SR-AUDIO.

Group

Bus

Syntax

BUS:B<x>:AUDio:CLOCk:SOUrc e

{CH<x>|CH<x>_D<x>|Math<x>| REF<x>|REF<x>_D<x>}

BUS:B<x>:AUDio:CLOCk:SOUrc e?

Arguments

CH<x> speciﬁes an analog channel as the clock source waveform for the audio bus.

CH<x>_D<x> speciﬁes a digital channel as the clock source waveform for the

speciﬁed audio bus.

Math<x> speciﬁes a math waveform as the clock source waveform for the audio

bus.

REF<x> speciﬁ es a reference waveform as the clock source waveform for the

audio bus.

REF<x>_D<x> speciﬁes a digital reference waveform as the clock source

waveform for the speciﬁed audio bus.

Examples

BUS:B1:AUDIO:CLOCK:SOURCE CH1_D1 sets D1 of channel 1 as the clock

source for the audio bus.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-119

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54