Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF
This command sets or queries the value of the subsystem flag bit (SUBSF bit, bit
17) in a status word for a MIL-STD-1553 bus to search on. The search number is
specified by x
>. The search condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:SUBSF
{ONE|ZERo|NOCARE}
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:SUBSF?
Arguments
ONE filters status words to only match those where the SUBSF bit has a value of 1.
ZERo filters status words to only match those where the SUBSF bit has a v
alue
of 0.
NOCARE disables filtering of status words on the SUBSF bit.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:STATUS:BIT:SUBSF ONE
specifies fi ltering status words for those where the SUBSF bit has a value of 1.
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:STATUS:BIT:SUBSF? might
return NOCARE, indicating that status words are not being filteredbasedon
the SUBSF bit value.
SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF
This command sets or queries the value of the terminal fl ag bit (TF bit, bit 19) in a
status word for a MIL-STD-1553 bus to search on. The search number is specified
by x. The search condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:TF
{ONE|ZERo|NOCARE}
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:TF?
2-694 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English