Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
DISplay:GLOb
al:PLOT<x>:STATE
This command sets o r queries the global state (display mode On or Off) of the
specified time trend plot. Setting this value true (On or NR1 ≠ 0)turnsonthe
source in the
waveform view. Setting this value false (Off or NR1 = 0 ) turns off
the source in the waveform view. This command only works if the specified
plot is added already.
Group
Display Control
Syntax
DISplay:GLObal:PLOT<x>:ST ATE {<NR1>|OFF|ON}
Arguments
<NR1> = 0 disables the display of the specified plot; any other value enables
display of the plot.
ON enables display of the specified plot.
OFF disables display of the specified plot.
Examples
DISplay:GLObal:PLOT1:STAT E ON displays plot 1.
DISplay:GLObal:PLOT1:STAT E? might return
:DISPLAY:GLOBAL:PLOT1:STA TE 1 indicating plot 1 is displayed.
DISplay:GLObal:REF<x>:STATE
this command sets or queries the global state (d
isplay mode On or Off) of the
specified reference waveform. Setting this v alue true (On or NR1 ≠ 0)turnson
the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns
off the source in the waveform view. This command only works if the specified
reference waveform is added already.
Group
Display Control
Syntax
DISplay:GLObal:REF<x>:STA TE {<NR1>|OFF|ON}
Arguments
<NR1> = 0 disables the display of the specified reference; any other value enables
display of the reference.
ON enables display of the specified reference.
OFF disables display of the specified reference.
2-230 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English