Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Group
Search and Mark
Synt
ax
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:CONDition
{DATA|IDANDDATA|ERRor|IDe ntifier|SLEEP|SYNCfield|WAKEup}
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:CONDition?
Arguments
Arguments are the available trigger conditions.
Examples
SEARCH:SEARCH1:TRIGger:A: BUS:LIN:CONDition DATA sets the trigger
c
ondition to data.
SEARCH:SEARCH1:TRIGger:A: BUS:LIN:CONDition? might return
:SEARCH:SEARCH1:TRIGGER:A :BUS:LIN:CONDITION SYNC, indicating the
trigger condition is sync.
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue
This command sets or queries the high data value string used in a LIN bus search.
The search number is specified by <x>. The search condition must be DATA or
IDANDDATA and the data qualifier must be INRANGE or OUTRANGE.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:DATa:HIVALue <Q String>
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:DATa:HIVALue?
Arguments
<QString> is a quoted string of 1s, 0s, or Xs representing the binary data string
to be used in a LIN search if the search condition is
IDentifier or IDANDDATA
(identifier and data).
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:LIN:DATA:HIVALUE? might
return
SEARCH:SEARCH1:TRIGGER:A:BU S:LIN:DATA:HIVALUE
"XXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXX"
indicating the high value is "don't care".
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier
This command sets o r queries the data qualifier used in a LIN bus search. The
search number is specified by <x>.
2-678 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English