To Next Page

To Previous Page

Commands listed in alphabetical order

CH<x>:DESKew

This command sets or queries the horizontal deskew time for the speciﬁed

channel. The channel is speciﬁed by x.

Group

Vertical

Syntax

CH<x>:DESKew <NR3>

CH<x>:DESKew?

Arguments

<NR3> is the deskew time for this channel, ranging from -125 ns to +125 ns with a

resolution of 40 ps. Out-of-range values are clipped.

Examples

CH4:DESKEW 5.0E-9 sets the deskew time for Channel 4 to 5 ns.

CH2:DESKEW? might return :CH2:DESKEW 2.0000E-09, indicating that the

deskew time for Channel 2 is set to 2 ns.

CH<x>:LABel:COLor

This command sets or queries the color of the speciﬁed channel label. The

channel is speciﬁed by x.

Group

Vertical

Syntax

CH<x>:LABel:COLor <QString>

Arguments

<QString> is the label color. To return the color to the default color, send an

empty s tring as in this example:

:CH5:LABEL:COLOR "".

Examples

CH2:LABel:COLor "#FFFF00" sets the label color to yellow.

CH2:LABel:COLor? might return :CH2:LABEL:COLOR "#FF0000" indicating

the color is red.

CH<x>:LABel:FONT:BOLD

This command sets or queries the bold state of the speciﬁed channel label. The

channel is speciﬁed by x.

2-190 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54