Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
HORizontal:S
AMPLERate:ANALYZemode:MINimum:OVERRide
Sets or queries the flag which allows override of the horizontal analyze minimum
sample rate.
Group
Horizontal
Syntax
HORizontal:SAMPLERate:ANAL YZemode:MINimum:OVERRide
{OFF|ON|0|1}
HORizontal:SAMPLERate:ANAL YZemode:MINimum:OVERRide?
Arguments
0 does not allow override of the horizontal analyze minimum sample rate.
1 allows override of the horizontal analyze minimum sample rate.
OFF does not allow override of the horizontal analyze minimum sample rate.
ON allows override of the horizontal analyze minimum sample rate.
Examples
HORIZONTAL:SAMPLERATE:ANAL YZEMODE:MINIMUM:OVERRIDE OFF does not
allow override of the h o
rizontal analyze minimum sample rate.
HORIZONTAL:SAMPLERATE:ANAL YZEMODE:MINIMUM:OVERRIDE? might
return
:HORIZONTAL:
SAMPLERATE:ANALYZEMODE:MINI MUM:OVERRIDE 1
indicating that override of the horizontal analyze minimum sample rate is allowed.
HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue
Sets or queries the minimum sample rate used by Analysis Automatic horizontal
mode.
Group
Horizontal
Syntax
HORizontal:SAMPLERate:ANAL YZemode:MINimum:VALue
{AUTOmatic|<NR3>}
HORizontal:SAMPLERate:ANAL YZemode:MINimum:VALue?
Related Commands
Arguments
AUTOmatic allows the oscilloscope to set the minimum value.
<NR3> is the minimum sample rate.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-355

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English