Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:EDGE:THReshold
This command sets or queries the source threshold level for an edge trigger search
to determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :EDGE:THReshold <NR3>
SEARCH:SEARCH<x>:TRIGger:A :EDGE:THReshold?
Arguments
<NR3> is the source threshold level for an edge trigger search.
Examples
SEARCH:SEARCH1:TRIGger:A:E DGE:THReshold 50.0e-3 sets the threshold
to 50 mV.
SEARCH:SEARCH1:TRIGger:A:E DGE:THReshold? might return
:SEARCH:SEARCH1:TRIGGER:A: EDGE:THRESHOLD 0.0E+0 indicating the
threshold is 0.0 V.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold
This command sets or queries the l ogic clock threshold for a logic trigger search
to determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:CLOCk:THReshold <N R3>
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:CLOCk:THReshold?
Arguments
<N
R3>
is the logic clock threshold.
Examples
SEARCH:SEARCH1:TRIGger:A:L OGIc:CLOCk:THReshold 50.0 e-3 sets
the threshold to 50 mV.
SEARCH:SEARCH1:TRIGger:A:L OGIc:CLOCk:THReshold? might return
:SEARCH:SEARCH1:TRIGGER:A: LOGIC:CLOCK:THRESHOLD 0.0 E+0
indicating the threshold is set to 0.0 V.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-715

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English